Dr Command Package Install/ Uninstall; Figure 5.1 [Mode] Window (Dynamic Reconfiguration) - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 5 Hot Maintenance in Red Hat Enterprise Linux 7
5.1 Dynamic Reconfiguration (DR)
Dynamic Reconfiguration

5.1.2 dr Command Package Install/ Uninstall

This section describes the install /uninstall of the dr command package.
To install dr command package, it is necessary to enable DR function on MMB.
The dr command can be applied using the SVIM application wizard. When installing after building the system,
procure the package from Fujitsu Web download site, and install following the procedure below.
<Common install /uninstall>
Use FJSVdr-util-RHEL<Version number>-x.x.x-x-x86_64.tar.gz.
The file name for the RHEL7 dr command package is FJSVdr-util-RHEL7-x.x.x-x-x86_64.tar.gz. the following
files are stored.

FIGURE 5.1 [Mode] window (Dynamic Reconfiguration)

Item
current status
setting
Setting status of the current DR function
(Enable/Disable)
Dynamic Reconfiguration function Enable/Disable
setting
-Enable
-Disable (Default)
146
Description
CA92344-0537-08