3.2.2 Functions That are Used for Partition Configuration
- Dynamic Reconfiguration
Dynamic Reconfiguration Function
This function allows changing the hardware configuration of a partition while the OS is running,
without a restart.
This function can be used in the following conditions.
Supported Models
2400E2/2400E3/2800E2/2800E3
Supported OSs
RHEL 6.6 or later and RHEL 7.1 or later
Supported Functions
Hot addition:
Hot addition of SBs and IOUs with PCI Box LH modules is possible with supported OSs and models.
Hot removal:
Hot removal of IOUs with PCI Box LH modules is possible with supported OSs and models.
Notes on hot removal of SBs:
2400E2/2800E2 supports hot removal of SBs for RHEL 7.1 or later.
2400E3/2800E3 supports hot removal of SBs for RHEL 7.2 or later.
PRIMEQUEST 2000 Series Design Guide
73
Copyright 2016-2017 FUJITSU LIMITED