Partition Configuration (Extended Partitioning); Enabling The Extended Partitioning Function; Figure 3.30 [Mode] Window Example - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation

3.5 Partition Configuration (Extended Partitioning)

3.5 Partition Configuration (Extended Partitioning)
Extended Partitioning function can be used and a physical partition be divided into two or more partitions. Each partition that
is divided by using the Extended Partitioning function is expressed as the Extended Partition.
This section describes the setting of Extended Partition configuration.
It is necessary to have completed the configuration setting of a physical partition that is divided by the Extended Partitioning
function before the setting of Extended Partition.
Remark
- PQ2400E2, 2800E2, 2400E and 2800E are available for this function.
- Power off, power on for every partition is required to reflect the configuration change of partition.
- Performance characteristics of the Extended Partition are different from the PPAR partition. Should be used after the
performance verification prior.
- All screenshots are display examples. The displayed contents differ according to the system configuration.

3.5.1 Enabling the Extended Partitioning function

This section describes the operations of enabling the Extended Partitioning function.
Operations
1. Click [Partition] - [Partition#x] – [Mode]
→ [Mode] window is displayed. For details of [Mode] window, see PRIMEQUEST 2000 series Tool Reference
(CA92344-0539).
[Mode] Window Example
FIGURE 3.30
46
CA92344-0536-04