Disassembly And Replacement - Toshiba e-STUDIO350 Service Manual

12.5 Disassembly and Replacement

[A] Developer unit
(1) Open the front cover and remove the toner
bag.
(2) Disconnect 1 connector and loosen 1 screw.
12
(3) Take out the developer unit.
Note:
Do not touch the developer sleeve on the top of
the developer unit.
[B] Developer material
(B-1) Discharge of developer material
(1) Slide the upper cover of developer unit to the
direction of the arrow and take off the cover
by releasing the latches.
e-STUDIO350/450 DEVELOPMENT SYSTEM
Fig. 12-501
Fig. 12-502
Fig. 12-503
Fig. 12-504
12 - 8
Developer sleeve
November 2003 © TOSHIBA TEC