Toshiba e-STUDIO350 Service Manual page 50

[F] High-voltage transformer
(1) Take off the rear cover (
(2) Disconnect 7 connectors.
2 2
(3) Remove 2 screws and release 2 locking sup-
ports. Then take off the high-voltage trans-
former.
Note:
When installing, make sure to match the col-
ors of connectors and harnesses according
to the color instruction on the board.
[G] Noise filter
(1) Take off the rear cover and right lower cover
( Chapter 2.5.1 [C][O]).
(2) Disconnect 4 connectors. Remove 1 screw and
1 washer. Then take off the noise filter.
e-STUDIO350/450 OUTLINE OF THE MACHINE
Chapter 2.5.1 [C]).
2 - 34
Fig. 2-536
White Black
Fig. 2-537
November 2003 © TOSHIBA TEC