Toshiba e-STUDIO350 Service Manual page 218

(3) Remove 3 screws and take off the front cover
of the developer unit.
(4) Disconnect 2 connectors.
(5) Remove 1 screw and take off the polarity ad-
justment lever.
(6) Remove 1 E-ring and take off the guide roller.
Note:
When reassembling, match the polarity adjustment
lever with the previously marked position on the
scale.
12
(C-2) Rear side
(1) Remove 2 screws and take off the bracket.
(2) Remove 1 E-ring and 4 gears.
(3) Take off the guide roller.
e-STUDIO350/450 DEVELOPMENT SYSTEM
Fig. 12-509
Polarity adjustment lever
Fig. 12-510
Fig. 12-511
Guide roller
Fig. 12-512
12 - 10
Guide roller
November 2003 © TOSHIBA TEC