Toshiba e-STUDIO350 Service Manual page 269

(4) Remove the clip, pulley, belt and pin on the
front side.
(5) Remove 2 bushing and take off the lower trans-
port roller.
(6) Remove 4 E-rings and take off 2 rollers.
Notes:
1. The roller has a one-way clutch inside.
When installing rollers, pay attention to the
rotation direction.
2. Replace 2 rollers at a time.
November 2003 © TOSHIBA TEC
Fig. 14-533
Lower transport roller
Bushing
Fig. 14-534
Roller
E-ring
Roller
E-ring
Fig. 14-535
14 - 19 e-STUDIO350/450 AUTOMATIC DUPLEXING UNIT
Pin
Belt
Clip
Pulley
Bushing
E-ring
14