Disassembly And Reassembly; Maintenance Tools - Toshiba TRST-A10 SERIES Maintenance Manual

3. DISASSEMBLY AND REASSEMBLY

3. DISASSEMBLY AND REASSEMBLY
1. Disconnect the power cord before disassembling the printer.
2. The print head becomes very hot while printing. Never touch the print head to avoid getting
burned.
CAUTION!
1. Do not disassemble or adjust the machine as far as it functions properly. Particularly, do not
loosen any screws unless it is necessary.
2. After the printer is disassembled and reassembled, be sure to check that there is no abnormality
before turning the power ON.
3. During maintenance, be careful not to leave the parts uninstalled or the screws un-tightened
inside the printer.
4. When handling the thermal head or electronic components, do not use gloves or other aids,
which may build up static electricity.
5. When disassembling or reassembling the printer, check the wires and cables for any damage. Do
not run them into a narrow space or set them in improper positions.
6. After reassembling, apply lubricant as required.
3.1

MAINTENANCE TOOLS

•
Philips-head screwdrivers
•
Any small flat object (For example: tweezers or a metal ruler)
WARNING!
3-1
EO18-13005
3.1 MAINTENANCE TOOLS