Toshiba e-STUDIO350 Service Manual page 46

2.5.2 PC boards
[A] Logic PC board (LGC board)
2 2
(A-1) LGC board
(1) Take off the rear cover (
(2) Loosen 8 screws and take off the LGC board
cover.
(3) Disconnect 15 connectors and 1 connector
with lock.
(4) Remove 4 screws and release 2 locking sup-
ports. Then take off the LGC board.
(A-2) LGC board unit
(1) Take off the rear cover (
(2) Loosen 8 screws and take off the LGC board
cover.
(3) Disconnect 15 connectors, 1 connector with
lock and 1 joint connector fixed to the case.
e-STUDIO350/450 OUTLINE OF THE MACHINE
Chapter 2.5.1 [C]).
Chapter 2.5.1 [C]).
2 - 30
Fig. 2-520
Lock connector
Fig. 2-521
Fig. 2-522
Lock connector
Fig. 2-523
November 2003 © TOSHIBA TEC