Toshiba e-STUDIO350 Service Manual page 180

Hide thumbs Also See for e-STUDIO350:
Table of Contents

Advertisement

(3) Remove 3 E-rings, pulley, one-way clutch and
take off the pickup roller.
(H-8) Drawer feed clutch
(1) Take off the drawer feeding unit (
10.4 (H-1)).
(2) Disconnect the connector and release the har-
9
ness from harness clamp.
(3) Remove 2 screws and take off the clutch
bracket and bush.
Notes:
Match the protruding portion of clutch with the
position shown in the drawing for assembling.
(4) Loosen 1 setscrew and take off the drawer
feed clutch.
e-STUDIO350/450 PAPER FEEDING SYSTEM
Pickup roller
Chapter
Setscrew
9 - 30
E-ring
One-way clutch
Pulley
E-ring
Fig. 9-478
Connector
Fig. 9-479
Bush
Clutch bracket
Fig. 9-480
Drawer feed clutch
Fig. 9-481
November 2003 © TOSHIBA TEC

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio450

Table of Contents