Description Of Operation; Scan Motor - Toshiba e-STUDIO350 Service Manual

6.3 Description of Operation

6.3.1 Scan motor

6
Motor speed-reduction pulley
(a) Scanning of an original placed on the original glass
This motor drives the carriages-1 and -2 through the timing belt and carriage wire. First, the scan
motor drives the carriages-1 and -2 to their respective home position. The home position is de-
tected when the carriage-1 passes the home position sensor. When the [START] button is pressed,
the both carriages start to move and scan the original on the glass.
(b) Scanning of an original placed on the RADF
The carriage-1 stays at the shading position during shading correction, and at the scanning
position during scanning operation.
e-STUDIO350/450 SCANNER
Wire pulley
Motor pulley
Fig. 6-301
6 - 4
Carriage-1
Scan motor
Carriage-2
Idler pulley
November 2003 © TOSHIBA TEC