Toshiba e-STUDIO350 Service Manual page 169

(11) Take off the jam access cover.
(12) Disconnect the connector and remove the har-
ness.
(13) Remove 2 screws and take off the right trans-
port guide.
Note:
When taking off the right transport guide, be
careful not to come off the bypass transport
guide and the spring together with it.
(14) Release the latch and take off the lower
drawer feed sensor.
November 2003 © TOSHIBA TEC
Jam access cover
Fig. 9-436
Harness
Fig. 9-437
Bypass transport guide
Screw
Fig. 9-438
Right transport
guide
Fig. 9-439
9 - 19 e-STUDIO350/450 PAPER FEEDING SYSTEM
Connector
Spring
Screw
Right transport guide
Lower drawer feed
sensor
9