Control Signals - Toshiba e-STUDIO350 Service Manual

10.3.2 Control signals

MAMCW signal (LGC → MTR: Input)
(1)
This is a signal to switch the direction of the main motor rotation. When this signal becomes "L" level,
the main motor rotates counterclockwise as seen from the rear side, and drives the developer unit,
drum, fuser unit, etc to the appropriate direction.
MAMPL signal (MTR → LGC: Output)
(2)
When the difference of the FG pulse cycle against the reference frequency is within ±6.25%, it is
specified that the motor is in a lock range (normal rotation), and this MAMPL signal becomes "L" level.
At this time, the LED "D4" is lit.
MAMCK signal (LGC → MTR: Input)
(3)
This is a reference clock signal to rotate the main motor at a fixed speed.
MAMBK signal (LGC → MTR: Input)
(4)
This is a signal to stop the main motor.
When it becomes "L" level, the main motor is braked.
MAMON signal (LGC → MTR: Input)
(5)
This is a signal to turn ON/OFF the main motor. When it becomes "L" level, the motor is rotated.
Signal level of the motor circuit
Signal
MAMCW
MAMPL
MAMCK
MAMBK
MAMON
* The signal names are for the connector CN318(LGC board).
November 2003 © TOSHIBA TEC
Level "H"
CCW direction
Abnormal rotation
Reference clock signal
Brake OFF
Motor OFF
10 - 3
Level "L"
CW direction
Normal rotation
Brake ON
Motor ON
e-STUDIO350/450 DRIVE SYSTEM
10