Toshiba e-STUDIO350 Service Manual page 172

[D] Registration roller
(1) Take off the bypass unit (
(2) Take off ADU (
(3) Take off the front cover (
(4) Take off the cleaner unit
( Chapter 11.6 [A]).
(5) Take off the rear cover (
(6) Take off the right rear cover
( Chapter 2.5.1 [G]).
(7) Loosen 9 screws of the SYS board case and
slide the SYS board upper cover to take it off.
9
(8) Loosen 5 screws, disconnect 2 connectors
and slide the SYS board lower cover to take it
off.
Note:
Do not vibrate the cover because HDD is
attached on it.
(9) Release the lock support on the upper side of
SYS board case and disconnect 4 connec-
tors.
e-STUDIO350/450 PAPER FEEDING SYSTEM
Chapter 9.4 (A-1)).
Chapter 14.5 [A]).
Chapter 2.5.1 [A]).
Chapter 2.5.1 [H]).
9 - 22
SYS board upper cover
Fig. 9-448
SYS board lower cover
Fig. 9-449
Fig. 9-450
November 2003 © TOSHIBA TEC