Toshiba e-STUDIO350 Service Manual page 47

Hide thumbs Also See for e-STUDIO350:
Table of Contents

Advertisement

(4)
Release all the harnesses from the harness
clamps and holders on the case.
(5)
Remove 5 screws and take off the LGC board
with the whole case.
[B] Hard disk
(1)
Take off the rear cover (
(2)
Loosen 9 screws and take off the SYS board
upper cover.
(3)
Disconnect 2 connectors.
(4)
Loosen 5 screws and take off the hard disk
with the whole SYS board lower cover.
November 2003 © TOSHIBA TEC
Chapter 2.5.1 [C]).
2 - 31
Fig. 2-524
Fig. 2-525
Fig. 2-526
Fig. 2-527
e-STUDIO350/450 OUTLINE OF THE MACHINE
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio450

Table of Contents