Toshiba e-STUDIO350 Service Manual page 267
Hide thumbs
Also See for e-STUDIO350:
- Service handbook (764 pages) ,
- Service manual (302 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
(5)
Remove 4 screws and take off the bracket.
(6)
Remove the clip, pulley, pin and belt on the
rear side.
(7)
Remove the clip on the front side.
(8)
Remove 2 bushings and take off the upper
transport roller.
[N] Middle transport roller
(1)
Take off the ADU, ADU inside rear cover,
ADU opening / closing switch, paper guide,
and ADU cover (
Chapter 14.5 [A] to 14.5 [E]).
(2)
Take off the ADU board.
November 2003 © TOSHIBA TEC
Screw
Fig. 14-525
Belt
Clip
Fig. 14-526
Fig. 14-527
ADU board
Fig. 14-528
14 - 17
e-STUDIO350/450 AUTOMATIC DUPLEXING UNIT
Bracket
Pin
Pulley
Upper transport roller
Bushing
Clip
Bushing
14
Advertisement
Table of Contents
