Toshiba e-STUDIO350 Service Manual page 205

[J] Middle fan
(1) Open the front cover. Take off the toner bag,
toner cartridge, developer unit and cleaner unit
( Chapters 12.5 [A] and 11.6 [A]).
(2) Take off the receiving tray and tray back cover
( Chapter 2.5.1 [H][I]).
(3) Take off the toner cartridge drive unit and
discharge LED (
(4) Remove 1 screw and take off the toner bag
holder.
(5) Remove 2 screw and take off the toner car-
tridge cover.
(6) Take off the rear cover, SYS board case, de-
veloper unit cooling fan-2 and developer unit
cooling fan unit-1
( Chapters 2.5.1 [C], 2.5.2 [C] and 11.6 [I]).
(7) Take off the registration clutch and gear unit
( Chapter 10.4 [B][C]).
(8) Remove 3 screws on the rear side.
(9) Remove 3 screws on the front side and
release the harnesses from 3 harness clamps.
(10) Take off the bracket of the toner cartridge.
November 2003 © TOSHIBA TEC
Chapter 12.5 [I][G]).
11 - 17
Toner cartridge cover
Toner bag holder
Fig. 11-631
Fig. 11-632
Fig. 11-633
e-STUDIO350/450 DRUM RELATED SECTON
11