Toshiba e-STUDIO350 Service Manual page 273

The followings are two output channels which are linked with the door switch.
(1) +5.1V
+5.1VD : CN414
(2) +24V
+24VD1 : CN414
+24VD1 : CN418
+24VD2 : CN414
+24VD3 : CN415
+24VD4 : CN415
+24VD5 : CN416
<<Output connector>>
Not linked with the door switch
CN412
CN413
CN415
CN416
Linked with the door switch
CN414
CN415
CN416
CN418
November 2003 © TOSHIBA TEC
Pin 9
Output to the LGC board
Pins 1 and 2
Output to the LGC board, PFP/LCF (via LGC board)
Pin 1
Output to the power supply cooling fan
Pins 5 and 6
Output to the LGC board,
Bridge unit / Job separator / Offset tray (via LGC board)
Pins 1 and 2
Output to the RADF
Pins 9 and 10
Output to the SLG board
Pin 3
Output to the finisher
For the SYS board
For the LGC board, FIL board / FUS board, FAX board, PFP/LCF (via LCG
board), Bridge unit / Job separator / Offset tray (via LGC board)
For the SLG board, RADF
For the finisher
For the LGC board, PFP/LCF (via LGC board), Bridge unit / Job separator /
Offset tray (via LGC board)
For the SLG board, RADF
For the finisher
For the power supply cooling fan
15 - 3 e-STUDIO350/450 POWER SUPPLY UNIT
15