Program Down Load Mode; General Description; Software Installatin - Toshiba B-EP2DL Series System Mode Manual

7. PROGRAM DOWNLOAD MODE
7.

PROGRAM DOWN LOAD MODE

This section provides step-by-step instructions on how to setup and download the firmware to the B-EP
series portable printer. The firmware download will be made from a PC via the USB interface
and IrDA interface of the printer.

7.1 General Description

This software is used for downloading the firmware or the character generator data to the B-EP series.
[Downloading of the Program or Character Generator Data]
The program and the character generator data have been written onto the flash ROM. In the case of
program upgrading due to additions or changes of the specification, it is possible to download the latest
program or character generator data from the PC to the printer via the USB or the IrDA communication.
7.2 Software Installation
To download the firmware or the character generator data, the Download Program for B-EP needs be
installed in the PC.
7.2.1 System Requirements
(1) OS: Windows XP (No operations under the other OS are guaranteed.)
(2) Interface:
(3) Memory:
(4) Hard disk free space:
USB (Type A to Type mini B connector)
IrDA (TEC protocol)
ACTiSYS corp. ACT-IR220L+
16 MB or more (32 MB or more recommended)
10 MB or more
7- 1
IrDA(IrCOMM)
ACTiSYS corp. ACT-IR2000UL
EO13-33005
7.1 General Description