Checking The Power Supply - Hughes HX90 User Manual

Checking the power supply

Chapter 4 • Troubleshooting
62
1039457-0001 Revision A
Use only the power supply that was enclosed with the satellite router when it was
shipped from the factory.
NOTICE
• Always use the power supply provided with the satellite router. The router's
performance may suffer if the wrong power supply is used.
• Connect the AC/DC power supply to a three-wire, grounded outlet with an
input of 110/240 VAC. A suitable surge protector is recommended to protect
the satellite router from possible damage due to power surges.
• Observe the power standards and requirements of the country where it is
installed.
If the LEDs do not function properly as described in this chapter, check the label on
the power supply and verify that you have the correct power supply.
If your power supply has any other part number, contact your service provider.