Inspection And Overhaul Of Crankcase; Wear Check Of Tappet Guides In Crankcase - MOTO GUZZI V-7 700 Operating Handbook

- T iming cover coupling flange.
- External bosses, lIanges and various hous-
ings for accessories fi lt ing.
INSPECTION AND OVERHAUL OF CRANKCASE
Check that contact surfaces between crankcase,
main bearing flanges, tappet guides, gearbox
coupling fla nge and timing cover flange are unim·
pai red without any scoring.
WEAR CHECK OF TAPPET GUIDES
IN CRANKCASE
Check correct clearance (see chart
«
Coupling
data of tappets and guides in crankcase» in
«TIMING DATA,. chapter) . If necessary, guides
must be reamed (see Fig. SO) using reamer of
1st or 2nd oversize as shown above in chart.
Oversize tappets are also available.
Fig. 50