Pressure Rod Cap; Outer Body Seal Ring; Clutch Adjustment - MOTO GUZZI V-7 700 Operating Handbook

PRESSURE ROD CAP
Check that it is not very damaged or worn out,
otherwise replace it.
OUTER BODY SEAL RING
Check that seal ring has not lost elasticity and
that is not crumbled, otherwise replace it.
CLUTCH ADJUSTMENT
Check that clutch lever on UH side of handlebar
has the correct free movement of about 4 mm.
(1/8") between lever and static body of same. If
play is more or less than that, adjustment is need-
ed . Slacken thumb screw (8) and obtain cor-
rect distance screwing in or out adjuster (A).
Adjustment can also be made slackening nut
(0) and acting on adjuster (C) bolted on the
battery support plate (see Fig . 73) .
After adjusting, remember to lubricate cable
terminals, operating lever a few times in order
to allow lubricant to get inside cable sheathing .
Fig. 73
51