MOTO GUZZI V-7 700 Operating Handbook page 87

ceases to work. If the current which caused the
tension rise does not cease, current limiter will
act as a current regulator, keeping the current
delivered by the generator down to the rated
value. The current limiter, therefore, protects
the generator down to the rated value.
The current limiter, therefore, protects the
generator power and besides that it adjusts
REGULATOR
LlMI TER
CURRENT
0+51
LIMITER
REGULATOR CURRENT
CUTOUT
B+
CU TOUT
Fig.
116/1 -
Operating stages of the three-core regulator unit.
AI: circuit breaker keeper. AL: limiter keeper. AR: regulator
keeper. SAi: circuit breaker current colI. SAl: limiter cur-
rent coil. Bt: battery. BV!: circuit breaker voltage coil. BVr:
regulator voltage coli. CD: generator field. CI: breaker cont-
tension (an d consequently battery charge cur-
rent, in order to allow a more regular charge
of same. Regulation tension must not exceed
battery overcharge tension, in order to avoid a
too high charge current, and it must not be too
quick reductlon of charge tension and a pro-
longation of charge, which would prevent the
battery from reaching a good charge condition.
LIMITER
REGULATOR CURRENT CUTOUT
LIMITER
REGULATOR CU RRENT
CUTOUT
acts. CL: limner contacts. CR: regulator contacts.
0+151:
generator positive terminal. 0-/31: generator negative term-
inal. OF/67: generator excitation terminal. M: ground. RRL:
regulator and limiter resistance. RS : damping resistance.
RV: voltage resistance. 30/8+: battery positive terminal.
85