MOTO GUZZI V-7 700 Operating Handbook page 56

gear control cam plate.
selector inner body, c/ w plungers, pawls and
springs (see Fig . 76/1) .
selector drum rod , extracting then selector
drum after disengaging fork ends.
fork shaft , removing then forks from layshaft.
- layshaft c/w gears and sliding sleeves.
Remove now the following parts from layshaft:
adjusting washer
low gear
circlip
2nd speed gear.
4th speed gear floating bush.
4th speed gear
thrust washer
- 3rd speed gear
54
mains haft, thrust washers and intermediate
washer, top gear side.
clutch shaft c/ w cush drive.
Fig . 77
Fig. 78
Remove from clutch shaft (see note below) the
following parts :
the two cush drive plate semicollars.
cush drive plate .
Fig . 79