Engine Overhaul; Stripping Of Engine - MOTO GUZZI V-7 700 Operating Handbook

ENGINE OVERHAUL
ENGINE STRIPPING
To strip remove the following :
12
drain oil from sump by unscrewing oil drain
plug (see B on Fig . 7) .
remove spark plugs.
ignition distributor un it c/ w support, after
unscrewing bolts securing same to crankcase
and removing gasket.
generator secur ing band, after removal 01
cotter pins and pins .
generator support bracket, after unscrewing
bolts securing same to crankcase.
clutch unit, unscrewing bolts securing starter
ring gear by means of ring wrench and tool
No. 12911801 (see 16 on Fig. 8). Bear in mind
that such bolts must be unscrewed in crossed
sequence. After removal of ring gear remove
Jj . .
Fig. 7
Fig.
a
n.S. clutch plate, intermediate plate, 1.5. clutch
plate , pressure plate , washer and springs.
- generator driving pulley, after unscrewing nut
on crankshaft by means of ring wrench and
tool No. 12911801.
- timing cover, after unscrewing bolts securing
same to crankcase.