Lightware MODEX-OPTS-TX User Manual page 91

Select the desired devices: highlight them with yellow cursor, then click OK.
The firmware components of the devices are listed on the following screen; their version
and the one that is available in the browsed package. Update versions will be uploaded
into the device(s).
Info: The media connector code of the MODEX is replaced by ***, since it has no importance
from firmware upgrade point of view.
Info: If MODEX cannot send the details about its firmware, click on the Use Bootloader button:
Add a device by clicking on the Add device button. The previous screen will be shown;
devices, what have already been added are marked in the first column. Select the desired
device(s) and click on OK.
Remove a device by selecting it (highlight with yellow) and click on Remove device button;
or click on Remove all button to empty the list.
Factory reset can be executed by ticking the option on the right. The settings has the same
effect as resetting the device from front panel.
Click on Next button to step forward.
Section 8. Firmware upgrade
MODEX-OPTS, MODEX-OPTM
User's Manual
Page 91 / 113