Switching Audio Input; Port Configuration; Baud Rate Setting; Databit Setting - Lightware MODEX-OPTS-TX User Manual

7.5.2. Switching audio input

Command format: CALL●/MEDIA/AUDIO/XP1:switch(<input>:<output>)
Response format: mO●/MEDIA/AUDIO/XP1:switch
Legend:
Example:
Explanation: P3 input port is switched to P4 output port.
Info: The current audio mode determines the possible crosspoint switches.
7.6. RS-232 port configuration

7.6.1. BAUD rate setting

Command format: SET●/MEDIA/UART/P1.Baudrate=<baud_value>
Response format: pw●/MEDIA/UART/P1.Baudrate=<baud_value>
Example:
Parameters:

7.6.2. Databit setting

Command format: SET●/MEDIA/UART/P1.DataBits=<databit_value>
Response format: pw●/MEDIA/UART/P1.DataBits=<databit_value>
Example:
Parameters:

7.6.3. Stopbit setting

Command format: SET●/MEDIA/UART/P1.StopBits={0|1|2}
Response format: pw●/MEDIA/UART/P1.StopBits={0|1|2}
Example:
Parameters:
Page 80 / 113
<input>: Audio input port number
<output>: Audio output port number
> CALL●/MEDIA/AUDIO/XP1:switch(P3:P4)
< mO●/MEDIA/AUDIO/XP1:switch
> SET●/SYS/MB/RS232/Local.Baudrate=9600
< pw●/SYS/MB/RS232/Local.Baudrate=9600
<baud_value>: Baud rate value between 75 and 18432000
> SET●/MEDIA/UART/P1.DataBits=8
< pw●/MEDIA/UART/P1.DataBits=8
<databit_value>:
> SET●/MEDIA/UART/P1.StopBits=0
< pw●/MEDIA/UART/P1.StopBits=0
.StopBits
Databit value between 1 and 15
Stopbit value
0
1
2
Section 7. Programmer's reference
1
1,5
2