Lightware MODEX-OPTS-TX User Manual page 90

Package information is loaded to the tabs:
Click on Next button and follow the instructions below:
Info: This window can be also displayed by pressing the
Info: Files with ".lfp" extension are associated to LDU during installation. If you double click on
the ".lfp" file, the application is run and the package is loaded automatically. In this case
you will see above screen.
Step 2. Select devices
The following step is to select the device(s) which will be updated. The available and
supported devices are searched and listed automatically; currently, LDU is able to update
the firmware of devices connected via Ethernet or USB port. MODEX can be updated via
Ethernet. If the desired device is not listed, update the list by clicking the Refresh button
and/or type its IP address in the line.
Page 90 / 113

General version info, creation date, short description,

Devices which are compatible with the firmware,

Components in the package with release notes.
button.
?
Section 8. Firmware upgrade