Parity Setting; Network Configuration; Query The Dhcp State; Change The Dhcp State - Lightware MODEX-OPTS-TX User Manual

7.6.4. Parity setting

Command format: SET●/MEDIA/UART/P1.Parity={0|1|2|3|4}
Response format: pw●/MEDIA/UART/P1.Parity={0|1|2|3|4}
Example:
Parameters:

7.7. Network configuration

7.7.1. Query the DHCP state

Command format: GET●/MANAGEMENT/NETWORK.DhcpEnabled
Response format: pw●/MANAGEMENT/NETWORK.DhcpEnabled={true|false}
Example:

7.7.2. Change the DHCP state

Command format: SET●/MANAGEMENT/NETWORK.DhcpEnabled={true|false}
Response format: pw●/MANAGEMENT/NETWORK.DhcpEnabled={true|false}
Example:

7.7.3. Query the IP address (dynamic)

Command format: GET●/MANAGEMENT/NETWORK.IpAddress
Response format: pr●/MANAGEMENT/NETWORK.IpAddress=<IP_address>
Example:

7.7.4. Change the IP address (static)

Command format: SET●/MANAGEMENT/NETWORK.StaticIpAddress=<IP_address>
Response format: pw●/MANAGEMENT/NETWORK.StaticIpAddress=<IP_address>
Example:
Section 7. Programmer's reference
> SET●/MEDIA/UART/P1.Parity=0
< pw●/MEDIA/UART/P1.Parity=0
.Parity
> GET●/MANAGEMENT/NETWORK.DhcpEnabled
< pw●/MANAGEMENT/NETWORK.DhcpEnabled=true
> SET●/MANAGEMENT/NETWORK.DhcpEnabled=false
< pw●/MANAGEMENT/NETWORK.DhcpEnabled=false
> GET●/MANAGEMENT/NETWORK.IpAddress
< pr●/MANAGEMENT/NETWORK.IpAddress=192.168.0.102
> SET●/MANAGEMENT/NETWORK.StaticIpAddress=192.168.0.105
< pw●/MANAGEMENT/NETWORK.StaticIpAddress=192.168.0.105
Parity setting
0 no parity
1
2
3
4
MODEX-OPTS, MODEX-OPTM
User's Manual
odd
even
zero
one
Page 81 / 113