Dialling By Using Call Logs - Panasonic KX-NT400 Operating Instructions Manual

Basic Feature Operation
2.
Press Advanced.
3.
Enter the terms you want to search for, and then
press Search.
Contacts that contain all of the search terms are
displayed.
Usage tips
•
If you select a contact and then go off-hook, the
contact will be dialled immediately.
•
You can add a contact in the LDAP directory to your
personal contacts. For details, see "Managing Your
Personal Contacts (Page 113)".
•
When you select a contact in the LDAP directory,
you can display detailed information (such as the
contact's name, phone numbers, e-mail address,
etc.) by pressing Show Details.
You can use the buttons at the bottom of the window
to call the contact's office, mobile, or home phone if
they are registered.
•
Press to select a different LDAP server.
For details about specifying LDAP server
information, see "LDAP Server Settings
(Page 130)".
68 Operating Instructions
•
For details about the icons and buttons on the
Contacts screen, see "Contacts Screen
(Page 34)".

Dialling by Using Call Logs

The last 100 incoming calls, outgoing calls, and missed
calls are stored in their respective logs, in order of
newest to oldest call.
You can make calls to the contacts/numbers listed in
the call logs.
1.
Press the Call Log tab.
2.
Select a log by pressing Outgoing, Incoming, or
Missed.
Note
•
If you select a contact and then go off-hook,
the contact will be dialled immediately.
3.
Select the desired entry.
Detailed information for the selected entry will
appear.
4.
Press Call.
Note
•
If you go off-hook while Call is selected, the
contact will be dialled immediately.
5.
To end the call, go on-hook.