Button
Wrap-up
System Alarm
Time Service (Day/Night/
Lunch/Break)
Answer
Release
Toll Restriction/Call Barring
ISDN Service
*5
Description & Programming Input
Used to switch the wrap-up status, Ready and Not Ready mode.
Programming Input
The Wrap-up button alternates the setting of Wrap-up mode, Not
Ready mode or Ready mode.
The Wrap-up button light shows the current status as follows:
•
Off: Ready mode
•
Red on: Not Ready mode
•
Flashing red: Wrap-up mode
Used to confirm a PBX error.
Programming Input
Used to switch the time service mode.
Programming Input
+ 0/1/2/3
(+
*4
The Time Service (Day/Night/Lunch/Break) button light shows the
current status as follows:
•
Off: Day mode
•
Green on: Lunch mode
•
Flashing green: Break mode
•
Red on: Night mode
•
Flashing red: Holiday mode
Used to answer an incoming call.
Programming Input
Used to disconnect the line during or after a conversation or to
complete a Call Transfer.
Programming Input
Used to change the toll restriction/call barring level of other extension
users temporarily.
Programming Input
+ Toll Restriction/Call Barring Level (1–7)
Used to access an ISDN service.
Programming Input
+ Desired no. (max. 32 digits)
+ Tenant no.)
Settings and Customisation
Operating Instructions
149