Feature Programming - Panasonic KX-NT400 Operating Instructions Manual

Feature Programming

The following table explains the features that are available in programming mode and how to programme them.
Note
•
The default values are displayed in bold.
Item
Display Language
Selection
Note
Changing this setting only
affects the language used
in the sub-display.
Display Switching Mode
Speed Dial
Hot Line
Would you like to dial a preset
number simply by going
off-hook?
Calling Line Identification
Restriction (CLIR)
Should you prevent your
number being displayed on
the called party's telephone?
Calling/Connected Line
Identification Presentation
(CLIP/COLP)
Which number should be
displayed on the called and
calling party's telephone?
Programming
Input
Select the language via the Language settings.
Set whether the call duration for outside calls is
displayed on the Calls screen in Line Buttons mode.
If the Calls screen is set to Call List mode, the duration
is always displayed for both internal and external
calls, regardless of this setting.
•
Store frequently dialled numbers in your contact list.
•
Selection & Parameter
Calls Screen (Page 39)
Managing Your Personal Contacts (Page 113)
desired no. (max. 32 digits)
Do not use
Use
No—Allows your number
to be displayed
Yes—Prevent your number
being displayed
Caller ID assigned to your
extension
Caller ID assigned on the
outside line being used
Settings and Customisation
Operating Instructions 135