Feature Operations
Dialling by Using Call Logs
The last 30 incoming calls and outgoing calls are stored
in their respective logs, in order of newest to oldest call.
You can make calls to the numbers listed in the call logs.
1.
Press
.
Call Log
2.
Press [ ] or [ ] to select the call log type, and then
press [ENTER].
3.
Press [ ] or [ ] to select the desired entry.
4.
Go off-hook.
5.
To end the call, go on-hook.
Note
•
For KX-UT133/KX-UT136, you can also press
an idle DN button (flexible button) in step 4 to
connect the call. For details about flexible
buttons, see "Flexible Buttons (KX-UT133/
KX-UT136 only) (Page 36)".
•
For KX-UT113/KX-UT123, you can press
instead of going off-hook. If more than
Call
one line is available at your unit, select the line
to use, and then press [ENTER].
•
You can add a call log entry to the phonebook.
See "Adding a Phonebook Entry from the
Incoming Call Log (Page 37)".
Editing a phone number before
dialling from the incoming call log
You can edit a phone number in the incoming call log
before using it to dial.
1.
Press
.
Call Log
2.
Press [ ] or [ ] to select "Incoming Call Log",
and then press [ENTER].
3.
Press [ ] or [ ] to select the desired entry.
4.
Do one of the following, depending on your unit:
For KX-UT113/KX-UT123 users
•
Press
, select "Edit", and then press
Menu
[ENTER].
For KX-UT133/KX-UT136 users
•
Press
.
Edit
5.
Edit the number, and then go off-hook or press
.
Call
6.
To end the call, go on-hook.
Redialling the Last Number You
Dialled (Redial, Last Number)
You can redial the last phone number that you dialled.
28
Operating Instructions
1.
Press [REDIAL/
2.
To end the call, go on-hook.
Note
•
For KX-UT133/KX-UT136, to select a line to use
to redial, press the appropriate DN button
(flexible button) before you press [REDIAL/
]. For details about DN buttons, see
"Flexible Buttons (KX-UT133/KX-UT136 only)
(Page 36)".
•
The unit may be configured to display the
outgoing call log instead of immediately
redialling. You can select an entry from the call
log to make a call (Page 28). For details, consult
your administrator or dealer.
One-touch Dialling (KX-UT133/
KX-UT136 only)
You can make a call with a One-touch operation if a
One-touch Dialling button has been created for the
desired party. One-touch Dialling buttons can also be
configured to access features of your phone system, if
available.
1.
Go off-hook, and then press the One-touch Dialling
button (flexible button).
2.
To end the call, go on-hook.
Note
•
A BLF (Busy Lamp Field) button (flexible button)
can also be used to call an extension simply by
pressing the button. For details, consult your
administrator or dealer.
•
For details about flexible buttons such as
One-touch Dialling buttons and BLF buttons,
see "Flexible Buttons (KX-UT133/KX-UT136
only) (Page 36)".
].
Document Version 2011-09