Advanced Search - Panasonic KX-NT400 Operating Instructions Manual

Destination selection for a contact from the
system speed dialling directory
Note
•
You can start a chat session by pressing
Start Chat. For details, see "Chat
(Page 87)".
6.
To end the call, go on-hook.
Usage tips
•
If you select a contact and then go off-hook, the
contact will be dialled immediately. The first number
registered, in the order of office ® mobile ® home,
is dialled.
•
You can add new contacts, and contacts from the
system speed dialling directory and extension
directory. For details, see "Managing Your Personal
Contacts (Page 113)".
•
The icons displayed next to contacts (such as
) indicate the contacts' status. For details, see
"Telephone status icons (Page 35)".
•
The following information about the selected
contact is shown at the bottom of the Contacts
screen:
–
"404": Phone number
–
"Available": Presence status (The presence
status is only displayed if the information can be
provided by the PBX.)
For details about presence status, see "Presence
Status Setting (Page 82)".
•
For details about the icons and buttons on the
Contacts screen, see "Contacts Screen
(Page 34)".
Note
•
You cannot search directories that are not
displayed. To display/hide directories, see
"Directory List Select Settings (Page 124)".
Making a Call from the LDAP
Directory
1.
Press the Contacts tab.
2.
If necessary, press the directory selection list and
select LDAP Search.
3.
To search for a contact, start entering the contact's
name. For details about entering characters, see
"Entering Text (Page 63)".
Note
•
The characters you enter are displayed in
.
•
You can enter up to 32 characters to search
for.
•
You can delete a character by pressing
(LEFT) on the Navigator key.
4.
Press to display contacts that match the search
criteria.
5.
Select the contact you want to call.
A window with a list of available destinations
appears.
6.
Press Call, and go off-hook.
7.
To end the call, go on-hook.

Advanced search

You can do an advanced search of the LDAP directory.
In an advanced search, you can search by criteria such
as first name, last name, and company. This feature is
available only when the KX-NT400 is idle.
1.
On the Contacts screen, make sure the LDAP
directory is displayed.
Basic Feature Operation
Operating Instructions 67