Panasonic KX-NT400 Operating Instructions Manual page 199

Portal
Issue
I cannot connect to a Web
site.
When I tap a link for a
phone number, the
number is not dialled
correctly.
When I tap the Home
button, nothing happens.
PT-Programming
Issue
While I am programming
the KX-NT400, the
KX-NT400 turns off the
LCD.
I cannot programme the
KX-NT400.
Possible Cause & Solution
•
The URL you specified is incorrect.
→
Confirm the URL in the Portal settings, and then try
connecting again.
•
You specified a domain name (e.g., "www.panasonic.com") in
the URL. Because the KX-NT400 does not support DNS
lookup, you can only access URLs by IP address.
→
Change the URL to specify the IP address for the desired
Web site.
•
The connection to the Web site might be inaccessible because
you need to access it through a proxy server. The
KX-NT400 does not support access through a proxy server.
→
Consult your administrator.
•
The number is invalid.
→
Tap the link for the phone number while on-hook and
confirm the number in the Dial window. If the number
appears valid, but is still dialled incorrectly, try dialling it
from another phone.
If the number is dialled correctly from another phone,
check the dial modification settings or consult your
administrator.
•
The dial modification settings are configured incorrectly.
→
Confirm that the dial modification settings are configured
correctly. If you are unsure whether they are correct,
consult your administrator.
•
If you are dialling an outside number, an outside line might not
be available.
→
Wait a while, and then try again.
•
You have not specified a homepage. (If you have imported
settings from an SD memory card, no homepage will be set,
even if one was set when the settings were exported.)
→
Set a homepage in the Portal settings.
Possible Cause & Solution
•
The phone has not been touched for the set duration of the
LCD Off Timer.
→
If no buttons are pressed and the phone is not used for the
set duration while programming the KX-NT400, the LCD
will turn off.
•
You are on a call.
→
Programme the KX-NT400 once you have finished the
call.
Appendix
Reference
Page 126
Page 126
—
Page 131
Page 131
—
Page 126
Reference
—
—
Operating Instructions 199