Panasonic KX-NT400 Operating Instructions Manual page 172

Installation and Setup
•
Default: 1
VLAN Priority
Enter the priority for the VLAN.
•
Default: 7
Upgrading the Firmware via FTP
1.
On the Setup screen, press Firmware Version
Update.
2.
Configure the FTP server settings.
3.
Press Start next to Download to begin
downloading.
The KX-NT400 starts downloading the firmware file,
and a window appears indicating the status of the
download.
4.
On the Firmware Version Update screen, press
Start next to Ver Update to begin the upgrade.
The upgrade will start, and a window appears
indicating the status of the upgrade.
5.
When the upgrade finishes, the KX-NT400 reboots
automatically.
Firmware Version Update screen
(4/4)
Enter the full path and file name for the firmware file
stored in an SD memory card.
The firmware data must be stored in the following
directory on the SD memory card:
\private\meigroup\pcc\pbxpt\nt400
File Name
Enter the full path of the firmware.
–or–
Press to browse the SD memory card to find
the file.
Upgrading the Firmware from an SD Memory
Card
1.
Insert an SD memory card that contains the
firmware file.
2.
On the Setup screen, press Firmware Version
Update.
172 Operating Instructions
3.
In File Name, enter the full path to the firmware file.
4.
Press Start.
The upgrade will start, and a window appears
indicating the status of the upgrade.
5.
When the upgrade finishes, the KX-NT400 reboots
automatically.
Note
•
You can reset the settings to their default values
by pressing Reset to Default.