Firmware Version Update - Panasonic KX-NT400 Operating Instructions Manual

Firmware Version Update

Firmware Version Update
The firmware can be updated only in the setup procedure after connecting the KX-NT400 to a PBX.
You can use a FTP server or an SD memory card to provide the new firmware data.
For details, see "Firmware Version Update (Page 171)".
Parameter Name
FTP Server
Address
FTP Server Control
Port
FTP User ID
FTP User
Password
FTP Path
FTP File Name
VLAN
VLAN ID
VLAN Priority
File Name
Description
Enter the IP address for the FTP server.
Enter the port number for the FTP server.
Enter the user ID for the FTP server.
Enter the user password for the FTP server.
Enter the path of the firmware data in the FTP
server.
Enter the file name of the firmware data.
Specify whether VLAN is used.
Enter the VLAN ID when VLAN is enabled.
Enter the VLAN priority when VLAN is
enabled.
Enter the file name and path of the firmware
data in the SD memory card.
Value Range
Valid IP Address
21, 1024–65535
0–24 characters
0–24 characters
1–128 characters
1–24 characters
Enable, Disable
1–4094
0–7
0–256 characters
Operating Instructions
Appendix
Default Setting
0.0.0.0
21
–
–
C:/panasonic/
nt400
PNT400
Disable
1
7
–
189