Installation And Setup; Connections - Panasonic KX-NT400 Operating Instructions Manual

Installation and Setup

Installation and Setup

Connections

This section explains the ports and connectors on the KX-NT400.
Connections for Ethernet/PC/AC Adaptor
CAUTION
AC adaptor (Optional)
•
Use a Panasonic AC adaptor KX-A420 (PSLP1662).
•
When the optional AC adaptor is used, that is the main disconnect device to stop electricity supply.
Ensure that the AC outlet is located near the unit and is easily accessible.
When connecting a headset
•
Ensure that the headset cord has slack and is not pulled tight during use to prevent damage to the
connectors.
Notice
It is recommended that you use one of the following Panasonic headsets:
For KX-NT400NE/KX-NT400RU users
For KX-NT400X users in South America
For all other KX-NT400X users
When selecting Ethernet cables
•
Use flexible, high-quality, snagless (without strain relief) cables. Do not use cables with coating
that may tear or crack when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
158 Operating Instructions
Clamp
To a Switching Hub
To a PC
Optional AC adaptor
(not included)
AC adaptor
KX-TCA89
KX-TCA87
KX-TCA86/KX-TCA92
Headset