Pt Programming - Panasonic KX-NT400 Operating Instructions Manual

Settings and Customisation

PT Programming

By using programming mode, you can customise the KX-NT400 beyond the settings that are available on the
Options tab.
You can access programming mode on the Programming screen. In programming mode, most operations
are performed using the Navigator key and dial keys.
To programme the KX-NT400 in programming mode
1.
Press the Options tab > Administrator Options > Programming.
2.
On the Programming screen, press PROG.
3.
Enter the input for the feature you want to set, and then press
See "Feature Programming (Page 135)".
4.
Enter the parameters for the feature as necessary.
See "Feature Programming (Page 135)".
5.
Press EXIT to exit.
Note
•
To continue programming other features, repeat the above procedure from step 2.
•
During programming, you can only use the dial keys to enter characters.
•
Pressing P allows you to access buttons normally found on ordinary IP-PTs as hard keys.
Usage tips
•
Once you enter programming mode (step 2 in the above procedure), you can also use the Navigator key
to scroll through the programmable features and to select parameters.
•
You can also access programming mode on the Feature Key screen or the Calls screen (in Line Buttons
mode). For details, see "Feature Key Screen (Page 58)" and "Calls Screen in Line Buttons Mode
(Page 46)".
134 Operating Instructions
(ENTER).