Panasonic KX-NT400 Operating Instructions Manual page 107

Feature
Log-in/Log-out, Wrap-up
You can control your status in an incoming call
distribution group.
When in the Log-out mode, incoming calls to the
group will not ring at your extension. When you
return, calls will again ring at your extension
(Default: Log-in). Even if your extension is
logged-in, you can have a specified time period
(wrap-up time) when you will not receive calls
after completing a previous call. This time can be
used for you to write a report and so on.
You can also manually select "Not Ready" mode
to temporarily leave a distribution group.
Malicious Call Identification (MCID)
You can ask your telephone company to trace a
malicious calling party during a conversation or
after the calling party hangs up.
You will receive the information on the malicious
call later on.
Manual Queue Redirection
When your incoming call distribution group is
busy and other outside calls arrive, the arriving
calls are put in a waiting queue.
Extensions can check the status of the queue with
the Hurry-up button light, and forward the longest
waiting call in the queue to a preset destination
manually.
Message Waiting (for a caller)
When the called extension is busy or does not
answer your call, you can leave a notification so
that the called party may call you back.
•
Leaving a Message Waiting Indication
(Page 90)
To set Log-out
+ ICD group extension no. (Specified)/
(All)
To set Log-in
+ ICD group extension no. (Specified)/
(All)
To enter Ready mode
To enter Not Ready mode
To toggle Ready/Not Ready/Wrap-up mode
Feature key screen + [Wrap-up]
*1
(TRANSFER) +
Feature key screen + [Hurry-up]
*1
To leave a message waiting indication
To leave a message waiting indication directly without
calling
+ extension no.
To cancel
+ extension no.
PBX Feature List
Operation
Operating Instructions 107