Maintenance - Panasonic KX-NT400 Operating Instructions Manual

Installation and Setup
secondary ports of the KX-NT400 on different
VLANs by assigning separate VLAN IDs to each
port.
QoS Setting screen (2/2)
Select whether to enable communication via Diffserv. If
you enable Diffserv communication, set DS Field for the
Primary Port.
Primary Port
Select whether to use Diffserv to enhance the
network traffic controlling.
•
Default: Disable
DS Field
Enter the priority level of the KX-NT400's packets
for the priority control.
•
Default: 5.0
Note
•
To use Diffserv, confirm that the routers
installed to your network support this feature.
For details, consult your administrator.
•
You can reset the settings to their default values
by pressing Reset to Default.
170 Operating Instructions

Maintenance

You can view MAC addresses of the KX-NT400 and
verify connections for the network devices on this
screen.
Network Maintenance screen
You can view the MAC addresses of the KX-NT400 and
verify the network connection.
VoIP
Shows the MAC address used for VoIP data.
Application
Shows the MAC address used for data other than
VoIP data.
Verifying a Connection (Send PING)
1.
On the Setup screen, press Maintenance.
2.
Enter an IP address in IP Address, and then press
Send.
A window appears showing the result of the
verification.
3.
On the result window, press Close.