Panasonic KX-NT400 Operating Instructions Manual page 148

Settings and Customisation
Button
Call Log
Call Log for ICD Group
Log-in/Log-out
Log-in/Log-out of a
specified group
Log-in/Log-out for all
groups
Hurry-up
148 Operating Instructions
Description & Programming Input
Used to show the incoming call information.
Programming Input
The Call Log button light shows the current status as follows:
•
Off: No incoming call. Or you have already viewed the call log.
•
Red on: You have missed calls to view.
Used to have a Call Log button for incoming call distribution group.
Programming Input
+ Incoming call distribution group extension no.
Used to switch between the log-in and log-out mode.
Programming Input
Used to have a Log-in/Log-out button for another incoming call
distribution group.
Programming Input
+ Incoming call distribution group extension no.
The Log-in/Log-out of a specified group button light shows the current
status as follows:
•
Off: Log-in mode
•
Red on: Log-out mode
Used to have a Log-in/Log-out button for all groups.
Programming Input
Used to transfer the longest waiting call in the queue of an incoming
call distribution group to the overflow destination.
Programming Input
+ Incoming call distribution group extension no.
The Hurry-up button light shows the current status as follows:
•
Off: No waiting call.
•
Red on: Some calls are waiting.
•
Flashing red: The number of calls exceeds the manual queue
redirection level.