Remote Call Fwd To Co - Panasonic KX-TVM50 Programming Manual

2.1 Mailbox Settings
2.1.9

Remote Call FWD to CO

Specifies the telephone numbers of destinations to which callers are forwarded when the subscriber
sets "Remote Call Forwarding to a Trunk". 2 telephone numbers can be specified per mailbox.
Note
• Class of Service programming determines if the subscriber is able to use this feature.
• The Remote Call FWD to CO is only available when the VPS is connected to a Panasonic
KX-T series PBX using DPT Integration.
Telephone Number 1, 2
Specifies the telephone numbers of destinations to which callers are forwarded when the subscriber
sets "Remote Call Forwarding to a Trunk". Telephone numbers can contain the digits "0-9" and " ".
These telephone numbers should begin with a Trunk Access number.
Value Range
Max. 24 digits (With the KX-TD500 and KX-TDA series)
Max. 16 digits (With other KX-T series PBXs)
Programming Guide References
"2.1.9 Remote Call FWD to CO" in 2.2.2 Personal Options
Feature Guide References
2.4.28 Remote Call Forwarding Set (DPT Integration Only)
Subscriber's Guide References
5.14 Remote Call Forwarding
54 Programming Guide