Quality Of Service (Qos) Settings - Panasonic KX-NT400 Operating Instructions Manual

2 that the KX-NT400 will use to communicate over the
network.
PTAP Server
Enter the port number for the PTAP server.
•
Default: 9300
PTAP Client
Enter the port number for the KX-NT400 to use for
PTAP communication.
•
Default: 9301
Note
•
You can reset the settings to their default values
by pressing Reset to Default.
•
Consult your administrator for more details.
Quality of Service (QoS)
Settings
To establish voice communications between the
telephones, the primary port of the KX-NT400 and the
connected PBX must belong to the same VLAN.
Consult your administrator for details about the correct
values.
QoS Setting screen (1/2)
Select whether to enable communication over a VLAN
in the network. If you enable VLAN communication,
enter the VLAN IDs and VLAN priorities for Primary
Port and Secondary Port.
VLAN
Select whether to use VLAN to enhance the
network traffic controlling.
•
Default: Disable
Primary Port
VLAN ID
Enter the VLAN ID number to which the PBX
belongs.
•
Default: 1
VLAN Priority
Enter the priority for the VLAN.
•
Default: 7
Secondary Port
VLAN ID
Enter the VLAN ID number to which the PBX
belongs.
•
Default: 2
VLAN Priority
Enter the priority for the VLAN.
•
Default: 0
Note
•
The KX-NT400 is equipped with 2 IP ports.
Therefore it is possible to place the primary and
Installation and Setup
Operating Instructions 169