Network Test; Firmware Version - Panasonic KX-UT113 Operating Instructions Manual

Customising the Telephone
If these settings are configured using Web User Interface Programming, this item is not displayed.
*6 This item cannot contain any of the following: " & : < > space.

Network Test

Setting
Network Test
Restart
Setting
Restart

Firmware version

Setting
Firmware version
Note
•
Your phone system dealer may offer new features or an improved version of the unit's software from
time to time. If you set the unit software update setting to manual mode through the Web user interface,
you need to download the update when "Update version. Press OK." is displayed. Contact your
administrator or dealer for further information.
52 Operating Instructions
Description
Confirm whether other network
devices (e.g., SIP server, routers,
switching hubs) respond to network
requests. When you select this item,
enter the IP address of the device to
which you want to test the
connection.
If a device does not respond, first
check the unit's network settings, and
then check the device's network
settings and connection.
Description
Restart the unit (Page 80).
Description
View the version of the currently
installed firmware. If a newer version
is available, its version is also
displayed. In this case, press
to update the firmware.
Value Range
xxx.xxx.xxx.xxx
Value Range
—
Value Range
—
Update
Default
—
Default
—
Default
—
Document Version 2013-03