About Alarm Messages - Nortel Secure Network Access Switch 4050 User Manual
Secure network access switch
Hide thumbs
Also See for Nortel Secure Network Access Switch 4050:
- Configuration (44 pages) ,
- Installation manual (46 pages)
Table of Contents
Advertisement
854 Appendix B Syslog messages
Table 191
Table 191
System control process messages — INFO
Message
System started [isdssl-<version>]
About alarm messages
Alarms are sent at a syslog level corresponding to the alarm severity shown in
Table
Table 192
Alarm severity
CRITICAL
MAJOR
MINOR
WARNING
*
Alarms are formatted according to the following pattern:
Id: <alarm sequence number>
Severity: <severity>
Name: <name of alarm>
Time. <date and time of the alarm>
Sender: <sender, e.g. system or the Nortel SNAS 4050 device's IP address>
Cause: <cause of the alarm>
Extra: <additional information about the alarm>
When an alarm is cleared, one of the following messages is sent:
•
•
320818-A
lists the System Control Process INFO messages.
Category
INFO
192.
Alarm severity and syslog level correspondence
Alarm Cleared Name="<Name>" Id= "<ID>" Sender="<Sender>"
Alarm Cleared Id="<ID>"
Explanation/Action
Sent whenever the system control process has been
(re)started.
Syslog level
ALERT
CRITICAL
ERROR
WARNING
ERROR
Advertisement
Table of Contents
