Configuring Client Filters Using The Srem - Nortel Secure Network Access Switch 4050 User Manual

2
Enter the group information in the applicable fields.
group Configuration fields.
Table 32
Group Configuration fields
Field
Group ID (Index)
Group Name
Maximum Login Sessions
Tunnel Guard SRS Rule
Comment
3
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Configuring client filters using the SREM

This section contains the following topics:
• "Adding a client filter" on page 214
• "Modifying a client filter" on page 217
Chapter 5 Configuring groups and profiles 213
Description
An integer in the range 1 to 1023 that uniquely
identifies the group in the Nortel SNAS 4050 domain.
This value cannot be changed after a group is created.
A string that uniquely identifies the group on the Nortel
SNAS 4050. The group name must match a group
name used by the authentication services.
The maximum number of simultaneous portal or Nortel
SNAS 4050 sessions allowed for each member of the
group.
The default is 0 (unlimited).
Specifies the preconfigured TunnelGuard SRS rule to
apply to the group.
For information about configuring the SRS rules using
the SREM, see "TunnelGuard SRS Builder" on
page 317.
A comment related to this group.
Nortel Secure Network Access Switch 4050 User Guide
Table 32 describes the