Mapping Linksets To A Group - Nortel Secure Network Access Switch 4050 User Manual

224 Chapter 5 Configuring groups and profiles

Mapping linksets to a group

To map a linkset to a group, select the Secure Access Domain > domain >
AAA > Groups > group > Linksets tab.
The Linksets screen appears and displays the group Linkset Table (see
Figure 51
Linksets screen for a group
The group Linkset Table allows you to manage linksets for the selected group, by
performing any of the following procedures:
•
•
•
320818-A
"Adding linksets to a group" on page 225
"Removing linksets from a group" on page 226
"Reordering linksets in a group" on page 226
Figure 51).