Nortel Secure Network Access Switch 4050 User Manual page 254

254 Chapter 6 Configuring authentication
/cfg/domain 1/aaa/auth #/ldap
followed by:
userattr <names>
isdbinddn <DN>
isdbindpas <password>
ldapmacro
320818-A
Refers to one of the following:
1. the LDAP attribute that contains the user name
used for authenticating a client in the domain
The default user attribute name is
Do not use the
isdbinddn
commands.
2. if the client's portal logon name is different from the
RDN (for example, when using LDAP for
authentication towards Active Directory), the LDAP
attribute that is used in combination with the client's
logon name to search the DIT
For example, a user record in Active Directory is
defined as the following DN:
ou=Users, dc=example, dc=com
user record also contains the attribute
sAMAccountName=bill
name is . If the user attribute is defined as
bill
sAMAccountName
will be found.
The and
isdbinddn
are required so that the Nortel SNAS 4050 can
authenticate itself to the LDAP server, in order to
search the DIT.
Specifies an entry in the LDAP server used to
authenticate the Nortel SNAS 4050 to the LDAP server,
so that the LDAP DIT can be searched.
The corresponds to an entry created in
isdBindDN
the Schema Admins account (for example,
ldap, cn=Users, dc=example, dc=com
Required for
searchbase
method 2.
Specifies the password used to authenticate the Nortel
SNAS 4050 to the LDAP server. The
the password, configured in the Schema Admins
account, for the entry referenced in
Required for
searchbase
method 2.
Accesses the LDAP Macro menu, in order to manage
macros (see "Managing LDAP macros using the CLI"
on page 258).
.
uid
and
isdbindpas
cn=Bill Smith,
. The
. The user's login
, the user record for Bill Smith
parameters
isdbindpas
cn=ldap
and
userattr
isdbindpas
isdBindDN
and
userattr
).
is
.