Mapping Vlans By Domain - Nortel Secure Network Access Switch 4050 User Manual

Mapping VLANs by domain

To map VLANs in a domain, select the Secure Access Domain > domain >
VLANs tab.
The domain VLANs screen appears (see
applied to the domain.
Figure 8
Domain VLANs screen
This screen allows you to manage VLANs on the domain by adding or deleting
entries to the VLAN Table. For detailed steps on adding or removing VLANs,
see:
•
•
"Adding VLANs to a domain" on page 98
"Removing VLANs from a domain" on page 99
Chapter 3 Managing the network access devices 97
Figure
Nortel Secure Network Access Switch 4050 User Guide
8), listing all current VLANs